|
PHYSICAL PROPERTY OF TEST DATA
|
| Material : |
VITON 75 SHORE A |
Date : |
May/06/2006 |
| Progum No. |
SV7553 |
Colour : |
GREEN |
| Spec: |
ASTM D2000 M2HK710A1-10B38EF31EO78Z |
| Original Properties : |
Spec. |
Progum Data |
| Hardness, Shore A |
75
+/-5 |
77 |
| Tensile
strength, min, MPa |
10 |
13.6 |
| Elongation,
min, % |
175 |
203 |
| Tear
Resistance, Kg-cm |
|
28 |
| Modulus
at 100%, MPa |
|
7.68 |
| Specific
Gravity |
|
2.116 |
A1-10 Heat Resistance : 250ºC x 70
hrs
Test method D573 |
| Hardness Change, max, pts |
+ 10 |
+2 |
| Tensile Strength Change, max, % |
-25 |
+6 |
| Elongation Change, max, % |
-25 |
-6 |
| Volume Change, % |
|
-3 |
B38 Compression Set : 200 ºC
x 22 hrs
Test method D395, Method B. |
| Max, % |
50 |
13 |
EF31 Fuel C Resistance : 23 ºC
x 70 hrs
Test Method D471. |
| Hardness Change, pts |
+/-5 |
-3 |
| Tensile Strength Change, max, % |
-25 |
-20 |
| Elongation Change, max, % |
-20 |
-4 |
| Volume Change, % |
0 ~ +10 |
+4 |
EO78 Fluid Resistance, 101 Oil :
200 ºC X 70 hrs
Test Method D471. |
| Hardness Change, pts |
-15 ~ +5 |
-6 |
| Tensile Strength Change, max, % |
-40 |
-29 |
| Elongation Change, max, % |
-20 |
+5 |
| Volume Change, % |
0 ~ +15 |
+11 |
EO88 Fluid Resistance, 7700 Oil :
200 ºC X 70 hrs
Test Method D471. |
| Hardness Change, pts |
-15 ~ +5 |
-12 |
| Tensile Strength Change, max, % |
-40 |
-30 |
| Elongation Change, max, % |
-20 |
+4 |
| Volume Change, % |
+25 |
+15 |
| Remark : |
1. |
The PROGUM data are based on testing slabs/buttons and are for
reference purpose only |
| |
2. |
PROGUM compound can meet above-mentioned ASTM D2000 spec. |
| |
3. |
This information is, to the best of our knowledge, accurate &
reliable to the date indicated. The above mentioned data have been
obtained by tests we consider as reliable. We do not assure that
the same results can be obtained in other laboratories, using different
conditions by the preparation and evaluations of samples. |
|
