|
PHYSICAL PROPERTY OF TEST DATA
|
| Material : |
EPDM 70 SHORE A, PEROXIDE CURED |
Date : |
JAN/12/2006 |
| Progum No. |
SE7051P |
Colour : |
BLACK |
| Spec: |
ASTM D2000 M2DA710A26B36C32EA14F17 |
| Original Properties : |
Spec. |
Progum Data |
| Hardness, Shore A |
75
+/-5 |
70 |
| Tensile
strength, MPa |
10 |
16.9 |
| Elongation,
min, % |
200 |
220 |
| Tear
Resistance, Kg-cm |
|
40.6 |
| Modulus
at 100%, MPa |
|
4.9 |
| Modulus
at 200%, MPa |
|
14.1 |
| Specific
Gravity |
|
1.123 |
A26 Heat Resistance : 150ºC x 70
hrs
Test Method D865 |
| Hardness Change, max, pts |
+ 10 |
+2 |
| Tensile Strength Change, max, % |
-20 |
0 |
| Elongation Change, max, % |
-20 |
-1 |
B36 Compression Set : 150 ºC
x 22 hrs
Test method D395, Method B. |
| Max, % |
40 |
11.4 |
C12 Resistance To OZONE
Test Method D1171, Exp. Method B |
NONBRITTLE |
PASS |
F17 Low Temperature Test
-40 ºC x 3 min. |
NO CRACK |
PASS |
| Remark : |
1. |
The PROGUM data are based on testing slabs/buttons and are for
reference purpose only |
| |
2. |
PROGUM compound can meet above-mentioned ASTM D2000 spec. |
| |
3. |
This information is, to the best of our knowledge, accurate &
reliable to the date indicated. The above mentioned data have been
obtained by tests we consider as reliable. We do not assure that
the same results can be obtained in other laboratories, using different
conditions by the preparation and evaluations of samples. |
|
